[Fixed] [1.83] Paris/Italy, missing materials file in console

[plykkegaard]

On the way to Modena from Paris

Near Paris?

Code: Select all

00:06:55.770 : <ERROR> [prefab] Incorrectly connected curve 'lane_0' (/prefab/cross/hw2-2_x_hw2-2_t_small.ppd)! Check connections and boundary nodes for all input/output curves
00:06:55.770 : <ERROR> [prefab] Incorrectly connected curve 'lane_1' (/prefab/cross/hw2-2_x_hw2-2_t_small.ppd)! Check connections and boundary nodes for all input/output curves
00:06:55.770 : <ERROR> [prefab] Incorrectly connected curve 'lane_10' (/prefab/cross/hw2-2_x_hw2-2_t_small.ppd)! Check connections and boundary nodes for all input/output curves
00:06:55.770 : <ERROR> [prefab] Incorrectly connected curve 'lane_14' (/prefab/cross/hw2-2_x_hw2-2_t_small.ppd)! Check connections and boundary nodes for all input/output curves
00:06:55.770 : <ERROR> [prefab] Incorrectly connected curve 'lane_16' (/prefab/cross/hw2-2_x_hw2-2_t_small.ppd)! Check connections and boundary nodes for all input/output curves
00:06:55.770 : <ERROR> [prefab] Incorrectly connected curve 'lane_23' (/prefab/cross/hw2-2_x_hw2-2_t_small.ppd)! Check connections and boundary nodes for all input/output curves
00:06:55.770 : <ERROR> [prefab] Incorrectly connected curve 'lane_25' (/prefab/cross/hw2-2_x_hw2-2_t_small.ppd)! Check connections and boundary nodes for all input/output curves
00:06:55.770 : <ERROR> [prefab] Incorrectly connected curve 'lane_26' (/prefab/cross/hw2-2_x_hw2-2_t_small.ppd)! Check connections and boundary nodes for all input/output curves
00:06:55.770 : <ERROR> [prefab] Incorrectly connected curve 'lane_33' (/prefab/cross/hw2-2_x_hw2-2_t_small.ppd)! Check connections and boundary nodes for all input/output curves
00:06:55.770 : <ERROR> [prefab] Incorrectly connected curve 'lane_40' (/prefab/cross/hw2-2_x_hw2-2_t_small.ppd)! Check connections and boundary nodes for all input/output curves
00:06:55.770 : <ERROR> [prefab] Incorrectly connected curve 'lane_41' (/prefab/cross/hw2-2_x_hw2-2_t_small.ppd)! Check connections and boundary nodes for all input/output curves
00:06:55.770 : <ERROR> [prefab] Incorrectly connected curve 'lane_48' (/prefab/cross/hw2-2_x_hw2-2_t_small.ppd)! Check connections and boundary nodes for all input/output curves
00:06:55.770 : <ERROR> [prefab] Incorrectly connected curve 'lane_51' (/prefab/cross/hw2-2_x_hw2-2_t_small.ppd)! Check connections and boundary nodes for all input/output curves
00:06:55.770 : <ERROR> [prefab] Incorrectly connected curve 'lane_56' (/prefab/cross/hw2-2_x_hw2-2_t_small.ppd)! Check connections and boundary nodes for all input/output curves

Might be in France?

Code: Select all

00:39:38.569 : <ERROR> [fs] Failed to open file "/material/ui/map/road/road_fr_n147.mat" in the read_only mode
00:39:38.569 : <ERROR> [material] Can not open '/material/ui/map/road/road_fr_n147.mat'

I assume it is in Italy

Code: Select all

01:54:02.747 : <ERROR> [fs] Failed to open file "/model/lamp/materials/Material_LampMask.mat" in the read_only mode
01:54:02.747 : <ERROR> [resource_task] Can not open '/model/lamp/materials/Material_LampMask.mat'

[mbman212]

Confirmed, I have the same issue in Sweden.

[SHAMAN]

Partially addressed this issue in this thread:

http://www.promods.net/viewtopic.php?f= ... 7&start=40

[mbman212]

Partially addressed this issue in this thread:

http://www.promods.net/viewtopic.php?f= ... 7&start=40

Yes but this has also something about prefabs, "incorrectly connected curve... please check..."

I guess something is missing cause I got the same errors as original poster.

[Nathan_A_RF]

This issue was fixed in a WIP version.