ProMods

Hi,

those two parameters are NOT in config.cfg - those two parameters are launch options (you can set them on Steam).

Best regards,
bmwGTR

Thank you for the help. Do you have recommended values for these settings?

Hi,

I'm using this one:
https://forum.scssoft.com/viewtopic.php ... 0#p1196989

Best regards,
bmwGTR

Thank you for your help.
Before i read your answer i found youtube vídeo With some values and i upped some of them even more and now i'm using:
-mm_pool_size 4000 -mm_max_resource_size 150 -mm_max_tmp_buffers_size 1500

It looks better and i get the stuttering more on DX9 mode. runing the game in DX11 it's much better and i've read that newer Graphics cards are having these problems playing With DX9 mode.
Is there any explanation to what each of these values are for so i can understand better wich ones i can put higher and Wich ones i can't change much?

Hi,

I found no explanation for it.
Look through the topic, maybe you will find one - or you can ask in this topic. At SCS forum also guys from SCS answer

Best regards,
bmwGTR

Thank you. I'll do that.

Hello! Tried those values (-mm_pool_size, -mm_max_resource_size, -mm_max_tmp_buffers_size ) with good results. Sadly another issue appear! Traffic disappear from roads. As I have read in SCS forum, I am not the only have having this consequence after setting those parameters. I use almost all Jazzycat traffic packs. Is there any way to make the two things live together?

@Black82: probably you have read my old post where indeed I had this problem. now it's the opposite, traffic generate better with these values: make sure you have at least 4 Gb VRAM to use pool_size value of 4000. if you have less, you need to reduce this value! for resource size there is no point to have it larger than 50. buffer size value 1000 is the maximum, any higher value is read as 1000. these settings are now in 1.35 absolutely necessary is you use large amount of traffic packs or/and many map mods.

Thanks Cipinho! I will try those values and will let you know about results!

EDIT: I have make some test in "heavy" areas like Barcelona City and surroundings, Tel Aviv and surroundings, and Wien (Using Promods obviously). Tests are positive without doubts. Just a very little frame drop in cities, but I think it's very normal. After setting these parameters, should I restore "uset r_buffer_page_size" to default value of 10? (I have it on 20).

no, you should leave r_buffer_page_size to 20 if you have traffic packs or even increase if needed. the sign that you need to increase the buffer page size is only when you start seeing cars with missing parts on the road and lots of related errors in gamelog, otherwise never increase this!