lheavy loads issue

[hankberube]

Some times i get an heavy load and for some reason i try to turn my truck does not trun. I think my frount end is not toughing the ground. why is this my engine is 1000 BHP and 7500 tqu. and what is the vol 16.1 is that the weight of the engine?

[mbman212]

Too heavy load causes your truck to do a wheelie. I prefer 4 or 5 axle configurations (though standard trucks don't have those and there is only a few which has at least four axles).

I'm not sure but someone said that 16.1 ia inside volume. For me it sounds like engine volume meaning it's 16.1 liter engine.

[hankberube]

so how to add an 3rd axles

[AndreasGRS3]

Try to put 4x2 axle and see if it works.

[hankberube]

i have the 6X4 chassis

[hankberube]

SiiNunit
{
accessory_engine_data : d16g750.volvo.fh16_2012.engine
{
name: "D16G750 Euro 5 / EEV"
price: 1500
unlock: 1
info[]: "1000 @@hp@@ (745@@kw@@)"
info[]: "3@@dg@@550 @@nm@@"
info[]: "1@@dg@@050-1@@dg@@400 @@rpm@@"
icon: "engine_01"
torque: 7500
volume: 16.1

defaults[]: "/def/vehicle/truck/volvo.fh16_2012/badge/badge_750.sii"
defaults[]: "/def/vehicle/truck/volvo.fh16_2012/c_equip/front_grid_01_cab.sii"
defaults[]: "/def/vehicle/truck/volvo.fh16_2012/s_equip/front_grid_01.sii"

i finished an job in a quarry and i am strugging to get up the thill in the quarry to get out. i am traveling 5MPH and it goes to 0 and back to 5. does this mean i need to in crease "info[]: "1@@dg@@050-1@@dg@@400 @@rpm@@" to beable to go up steap hill

[Sir_Tramalot]

That would be about right, with a heavy load, you go up a hill in a low gear, and in turn, a low speed.

[hankberube]

in that quarry i just dropped off my load and was starting to head to town to do some services to my truck and i just barely made up with no load

[getrixx]

It may sound stupid but are you sure the retarder was off?
I had that once.
An empty truck should get out of a quarry without struggle.

[hankberube]

dont use it. when i am on the road i drive at top speed and i get there quick.