2.18 crash: malformed files

[jelledc]

Hello, after a long absence i'm back, and while I've already had some issues (forgot model 3, wrong loading order) which crashed on startup, i've got it playable now. Only problem is that it doesn't stay that way very long.

It started with a crash on the A4-A31 Luxembourg - Metz-Centre (just after the A4-A31 crossing), that i've got following errors

Code: Select all

00:11:20.237 : [actor] Initialized at [-16295.8;55.7;5536.6]
00:13:05.332 : <ERROR> [resource_task] Can not load '/model/vehicle/pm_ducato/pm_ducato.pmd'.
00:13:05.357 : <ERROR> [model] Model descriptor '/model/vehicle/pm_ducato/pm_ducato.pmd' is malformed.
00:13:05.357 : <ERROR> [resource_task] Can not load '/model/vehicle/pm_ducato/pm_ducato.pmg'.
00:13:05.383 : <ERROR> [model] Model geometry '/model/vehicle/pm_ducato/pm_ducato.pmg' is malformed.
00:13:05.384 : <ERROR> [ld] Failed to read '/model/vehicle/pm_ducato/pm_ducato.pmd'.
00:13:05.384 : <ERROR> model_template.cpp(588): ?cache_data_handler@model_template_u@prism@@UEAAXXZ: Failed to load model descriptor (.pmd) or model geometry (.pmg) for '/model/vehicle/pm_ducato/pm_ducato.pmg'.

At first i thought that Jazzycat's files were at fault, so i removed all AI-traffic mods, rebooted again and took a job in the other direction. That went well, but when i wanted to start a follow-up job in Calais, i've got following errors

Code: Select all

00:34:27.734 : [actor] Initialized at [-31180.1;12.9;-5161.0]
00:34:30.854 : <ERROR> [resource_task] Can not load '/model/vehicle/trailer_reefer.pmd'.
00:34:30.854 : <ERROR> [resource_task] Can not load '/model/vehicle/trailer_reefer.pmg'.
00:34:30.870 : <ERROR> [model] Model descriptor '/model/vehicle/trailer_reefer.pmd' is malformed.
00:34:30.870 : <ERROR> [model] Model geometry '/model/vehicle/trailer_reefer.pmg' is malformed.
00:34:30.871 : <ERROR> [ld] Failed to read '/model/vehicle/trailer_reefer.pmd'.
00:34:30.871 : <ERROR> model_template.cpp(588): ?cache_data_handler@model_template_u@prism@@UEAAXXZ: Failed to load model descriptor (.pmd) or model geometry (.pmg) for '/model/vehicle/trailer_reefer.pmg'.

Now all of Jazzy's cargo mods went out, but when i extracted them, his files were not in the "model/vehicle/type" format, because he always put in his own name

Now i have deleted all my mods, except promods companies 1.14, promods 2.18 and rusmap 1.74 (in the correct order, did a triple check), and on the way from Calais to Rotterdam (in Gent, E17 direction Antwerpen right after the E40-crossing) I've got following errors

Code: Select all

00:12:39.373 : <ERROR> [prefab_desc] No priority set for intersection curve 74 'prefabloc652' (/prefab/tollgate/belgium/tollgate.ppd)
00:12:39.373 : <ERROR> [prefab_desc] No priority set for intersection curve 77 'prefabloc655' (/prefab/tollgate/belgium/tollgate.ppd)
00:12:45.065 : <WARNING> Dropped 2745 instances of '/model/vegetation/grass/sc_grass_green1.pmd' exceeding the per-item rendering limit (65536). Reduce instanced model density or increase instanced model (grass/tree) variability by using profile with more model types.
00:13:03.688 : <ERROR> [resource_task] Can not load '/model/vehicle/lifter.pmg'.
00:13:03.688 : <ERROR> [resource_task] Can not load '/model/vehicle/lifter.pmd'.
00:13:03.713 : <ERROR> [model] Model descriptor '/model/vehicle/lifter.pmd' is malformed.
00:13:03.713 : <ERROR> [model] Model geometry '/model/vehicle/lifter.pmg' is malformed.
00:13:03.713 : <ERROR> [ld] Failed to read '/model/vehicle/lifter.pmd'.
00:13:03.713 : <ERROR> model_template.cpp(588): ?cache_data_handler@model_template_u@prism@@UEAAXXZ: Failed to load model descriptor (.pmd) or model geometry (.pmg) for '/model/vehicle/lifter.pmg'.

The 3 game.log files are complete, and can be downloaded here: https://drive.google.com/drive/folders/ ... sp=sharing

many thanks in advance

Jelle

EDIT: Now posted in right section

[Volleybal4life]

Simple question, did you already try it with only ProMods enabled?

Also, Jazzycats traffic mods aren't yet updated to ETS2 1.28.

[CAPLV]

i`m using all jazzycat traffic/cargo mods.. and no problem like these.. maybe corrupted files?

btw Jazzycat updated all cargo mods to 1.28 compatible.

[jelledc]

The last time i tried (error 3) was only promods, promods companies and rusmap, also if you look at the error, it cant be jazzycat's file, as he names them models/vehicles/jazzycat/...

[Volleybal4life]

I ask you again, did you already try it with ONLY ProMods enabled?

And you may need to review your mods loading order. viewtopic.php?f=42&t=14523

[metpei]

Your profile may be corrupted.
Make new profile and put ONLY PM files, if still crashes either PM files or ETS2 has been corrupted.
Try steam library - ETS2 properties - local files tab - verify integrity of game files.

[jelledc]

Veryfying game files is not an option atm, modem broke down last night... all other options i'm going to try this evening...

@Volleybal4life: only promods, do you mean only map? Or map and companies?

[mads1153]

Just try with Promods 2.18 map files only.
If it works fine, can you try enabling one by one mod to see until you found the culprit?

[jelledc]

It's definately Promods that's causing the crash:

First i tried only Promods + companies; same route from Calais to Antwerp, crash when going up the E17-bridge after the E40-E17 crossing (where you see the stadium at the other side); again the same logs as in error 3

Code: Select all

00:10:58.097 : <ERROR> [prefab_desc] No priority set for intersection curve 74 'prefabloc652' (/prefab/tollgate/belgium/tollgate.ppd)
00:10:58.097 : <ERROR> [prefab_desc] No priority set for intersection curve 77 'prefabloc655' (/prefab/tollgate/belgium/tollgate.ppd)
00:11:20.197 : <ERROR> [resource_task] Can not load '/model/vehicle/lifter.pmd'.
00:11:20.197 : <ERROR> [resource_task] Can not load '/model/vehicle/lifter.pmg'.
00:11:20.223 : <ERROR> [model] Model descriptor '/model/vehicle/lifter.pmd' is malformed.
00:11:20.223 : <ERROR> [model] Model geometry '/model/vehicle/lifter.pmg' is malformed.
00:11:20.223 : <ERROR> [ld] Failed to read '/model/vehicle/lifter.pmd'.
00:11:20.223 : <ERROR> model_template.cpp(588): ?cache_data_handler@model_template_u@prism@@UEAAXXZ: Failed to load model descriptor (.pmd) or model geometry (.pmg) for '/model/vehicle/lifter.pmg'.

Then another run with only Promods, no companies, same error on exactly the same location

Code: Select all

00:09:27.733 : <ERROR> [prefab_desc] No priority set for intersection curve 74 'prefabloc652' (/prefab/tollgate/belgium/tollgate.ppd)
00:09:27.734 : <ERROR> [prefab_desc] No priority set for intersection curve 77 'prefabloc655' (/prefab/tollgate/belgium/tollgate.ppd)
00:09:52.093 : <ERROR> [resource_task] Can not load '/model/vehicle/lifter.pmg'.
00:09:52.093 : <ERROR> [resource_task] Can not load '/model/vehicle/lifter.pmd'.
00:09:52.118 : <ERROR> [model] Model descriptor '/model/vehicle/lifter.pmd' is malformed.
00:09:52.118 : <ERROR> [model] Model geometry '/model/vehicle/lifter.pmg' is malformed.
00:09:52.118 : <ERROR> [ld] Failed to read '/model/vehicle/lifter.pmd'.
00:09:52.118 : <ERROR> model_template.cpp(588): ?cache_data_handler@model_template_u@prism@@UEAAXXZ: Failed to load model descriptor (.pmd) or model geometry (.pmg) for '/model/vehicle/lifter.pmg'.

Now I did a cache verify of ETS2; started a new profile with only Promods, and went from Lille To Antwerp: exact same place again the same crash

Code: Select all

00:05:41.958 : <ERROR> [prefab_desc] No priority set for intersection curve 74 'prefabloc652' (/prefab/tollgate/belgium/tollgate.ppd)
00:05:41.958 : <ERROR> [prefab_desc] No priority set for intersection curve 77 'prefabloc655' (/prefab/tollgate/belgium/tollgate.ppd)
00:05:53.992 : <ERROR> [resource_task] Can not load '/model/vehicle/lifter.pmg'.
00:05:53.992 : <ERROR> [resource_task] Can not load '/model/vehicle/lifter.pmd'.
00:05:54.011 : <ERROR> [model] Model descriptor '/model/vehicle/lifter.pmd' is malformed.
00:05:54.011 : <ERROR> [model] Model geometry '/model/vehicle/lifter.pmg' is malformed.
00:05:54.011 : <ERROR> [ld] Failed to read '/model/vehicle/lifter.pmd'.
00:05:54.011 : <ERROR> model_template.cpp(588): ?cache_data_handler@model_template_u@prism@@UEAAXXZ: Failed to load model descriptor (.pmd) or model geometry (.pmg) for '/model/vehicle/lifter.pmg'.

I've uploaded the full game.logs to my Google Drive (link in first post)

Someone has a solution, a possible fix or another thing I can try? Because I really want to go back to trucking, instead of testing averything

thx already

Jelle

[metpei]

I haven't seen those errors before, you should do that integrity check.
Last week when 1.28.1.3 update came, I did that check too, yesterday I had mod problems and did integrity check again, steam loaded 143MB and still same game version.
Try to make another new profile with no mods if that gives errors too?
Edit: do you still have PM 7z files? Try to test them with test tool in download page?