Page 1 of 1

[Not a bug] Unable to climb on the rise ...

Posted: 18 Apr 2015 21:02
by SHAMAN
DAF XF 116 slips, on the chassis 6x4 no such problem ?? :cry:

Image

Re: Unable to climb on the rise ...

Posted: 18 Apr 2015 21:12
by Jan Verschueren
SHAMAN wrote:DAF XF 116 slips, on the chassis 6x4 no such problem ?? :cry:

Image
Have you tried switching to the sequential gearbox yet? -won't help if you stall out again, but if you load from an autosave, you should be able to go down the gears quick enough to keep going, without spinning up the driving wheels.

Re: Unable to climb on the rise ...

Posted: 18 Apr 2015 21:20
by SHAMAN
Jan Verschueren wrote: Have you tried switching to the sequential gearbox yet? -won't help if you stall out again, but if you load from an autosave, you should be able to go down the gears quick enough to keep going, without spinning up the driving wheels.
Use only machine. Since it is not possible to climb. Most likely you want to use here the chassis 6x4 ...

Re: Unable to climb on the rise ...

Posted: 19 Apr 2015 14:31
by SHAMAN
Congress on the sidelines on the chassis 6x2, Iceland, turns calling 911

Image

Re: Unable to climb on the rise ...

Posted: 15 Jan 2018 12:14
by Nathan_A_RF
You need a fairly powerful truck and manual gears normally to tackle the snow